You are here: Home / Archives for Cover Story

High-Pressure Fog Spray System

June 26, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

[INQ. NO. 2406M07] WITHMIST has recently displayed its advanced high-pressure fog-spray system at a local exhibition. The fog-spray system is a solution that sprays ultra-fine fog at high pressure to form a thick layer. The company has solutions suitable for various sites from 7m to 90m.
Fog sprayers are mainly used at construction sites. They spray a fine mist to capture ultrafine dust floating in the air, and flying dust from the construction process.
A spokesperson for the company explained, “Construction, civil engineering, and demolition sites are often located in downtown or residential areas. Fine fog particles can collect pollutants in the air and lower the site temperature.”
The company has also introduced a fog-spray solution for outdoor air conditioner units. When the outdoor unit operates, it sprays fog at lower temperature. The company spokesperson remarked, “By lowering the temperature around the outdoor unit of the air conditioner by about 5°C, the intake air can be cooled and the energy used for cooling can be reduced accordingly.”
The company aims to provide solutions stably for improving the environment through branding the fog-spray system for the issue of ESG (environmental, social, governance) and carbon-neutrality technology.


 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:

Large EC Blower

June 26, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

[INQ. NO. 2406M06] At HVAC KOREA 2024, held from May 22 through 24, a machinery equipment exhibition in Korea, a large Electronically Commutated Motor (ECM) blower for data centers appeared, and attracted the keen attention of visitors.
The EC blower manufactured by GUMSUNG POONGRYUCK Co., Ltd. is a blower that applies the ECM control method that controls the number of rotations with a built-in controller. The power loss caused by power conversion is smaller than a regular blower that requires a separate inverter module, and installation space can also be reduced.
A spokesperson for the company explained, “Large EC blowers are mainly installed in data centers, and we have products of various sizes that we supply as equipment for air conditioners and thermohygrostats.”
EC blowers have until now been mostly foreign products, but the company has finally started to domestically manufacture the fans and motors. The advantage the company has is its fast delivery time of about three weeks.


 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:

Entrance-Cleaning System

June 26, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

[INQ. NO. 2406M05] Himpel Co., Ltd., a ventilation appliance specialist, recently launched a new entrance-cleaning system.
The entrance-cleaning system is an air-cleansing solution consisting of a built-in entrance purifier and an entrance dual air-cleanser. It is a new-concept entrance-ventilation product that manages indoor air comfortably from the entrance by preventing fine dust, dirt, pets’ hair, and external contaminants on the body from entering the room after going out.
The built-in purifier in the entrance uses a powerful triple filter, including free HEPA, and deodorizing, to remove everything from ultra-fine dust entering the entrance, to various odors and harmful gases. You can easily replace filters and elements periodically through filter notifications.
The entrance dual air-cleanser consists of a cleaner, an air gun, and a crevice brush, and can be used as needed for extracting dust from clothes, removing contamination, and cleaning entranceways. When the entrance dual air cleaner operates, the entrance built-in purifier operates simultaneously to manage contaminants at once.

In addition, Himpel also launched its air monitor Mini, which conveniently monitors air-quality in real time. It is a portable air-quality meter for smartphones that measures carbon-dioxide concentration in four levels ― good, average, bad, and very bad ― in various places including homes, offices, nursing homes, and academies.
A spokesperson for Himpel explained, “As the importance of indoor air-quality management has increased, consumer needs for clean residential ventilation have also become more diverse,” adding “Recently, as the construction market has been adopting ventilation options that consider the convenience of residents through differentiated sales strategies, we therefore expect to see synergy effects through potential business with construction companies.”
As a leading Indoor Air Quality (IAQ) specialized company that manufactures bathroom ventilators and ventilation systems, Himpel makes healthy and pleasant living possible with high quality of indoor air under the mission of “contributing to human health through air and energy technology.”


 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:

Electric Ambulance

June 26, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

[INQ. NO. 2406M04] Autech Corporation, a company specializing in special-purpose vehicles, recently introduced its new concept ‘ST1 electric ambulance’ at a domestic fire-safety exhibition.
Autech’s newly developed ST1 electric ambulance is an electric-vehicle-based emergency mobility that integrates Autech’s unique emergency mobility technology, which has for many years produced special firefighting ambulances and negative pressure special ambulances. The mobility of Staria and the wide space of Solati were applied to increase usability.
ST1 (Service Type 1) is a new electric commercial vehicle developed by Hyundai Motor Company, and is a business platform that can be expanded into an optimized form depending on the purpose of use, based on the chassis-cab.

Autech developed the ST1 electric ambulance concept car ST1. In addition, Autech also exhibited several competitive products: special ambulance; negative pressure special ambulance; low-floor special ambulance; negative-pressure special ambulance; and emergency medical equipment.
A spokesperson for Autech explained, “Autech, a leader in advanced emergency mobility, has developed the ST1 electric ambulance concept car in line with the global transportation environment changing towards eco-friendly mobility,” adding, “We will collaborate with the National Fire Agency (NFA) in the future to enhance the practicality of the ST1 electric- ambulance concept car by reflecting the vivid opinions of firefighting paramedics in the field.”
Autech is leading the era of the 4th industrial revolution with its ‘No.1 Products’ made with a set of integrated and combined next-generation technologies such as AI technology, IoT, and so forth. Also, with the new idea which never existed before, Autech is working hard to become more influential in the global market by making aggressive investments in R&D.


 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:

Vascular Intervention Robot

June 26, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

[INQ. NO. 2406M03] LN Robotics Inc. recently presented its surgical assistance robot, the All-purpose Vascular Intervention Assistance Robot (AIVAR). This robot, which is currently scheduled for commercialization in Korea, is a robot that assists coronary angiography and interventional surgery, and boasts expanded surgical tool operability and a unique haptic interface compared to existing foreign products.
AIVAR reflects precision-control technology that expresses the movements of a skilled operator through a robot system, and has solidified its differentiation with multi-channel surgical tool control technology that responds to complex procedures.

In particular, various clinical applications are possible, such as remote intervention procedures for emergency patients, and non-face-to-face intervention procedures to respond to infection situations ― and it can even prevent radiation exposure of medical staff that may occur during procedures.
A spokesperson for LN Robotics explained, “We recently launched AIVAR in the domestic market by promoting the sale of products based on innovative medical technology, and we are also accelerating our sales activities for this purpose,” adding, “For overseas markets, we are entering the market with the approval of the Ministry of Food and Drug Safety and looking for local partners, targeting Southeast Asia, Central Asia, and South America as much as possible.”
LN Robotics is conducting medical marketing targeting domestic specialty hospitals (about 10 hospitals) and major domestic hospitals (five hospitals).
LN Robotics Inc. is a company that started out as a medical robot research team organized at Asan Medical Center in Seoul in 2012, and converted to a corporation in 2019 to begin full-scale business operations.
Based on its long-term research and development experience, LN Robotics is continuing to attempt to apply various cutting-edge technologies such as artificial intelligence (AI), big data, robotics, and biomaterials to medical robots.


 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:

Bone-Density Meter

June 26, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

[INQ. NO. 2406M02] InAlyzer AIR, which utilizes 4-channel true fan beam technology, is the only fan beam DXA bone-density measuring device in Korea that provides raw image mode.
InAlyzer AIR provides both raw images and BMD images, allowing high-resolution bone images to be viewed, along with measurement results, through PACS. It provides a fast scanning speed of 30 seconds, and high-resolution images.
And the high-resolution images provided through the product not only increase the convenience of setting an accurate ROI, but are also a great help in deriving accurate diagnostic results.
In addition, this bone-density measuring instrument provides various diagnostic tools through intuitive software to enable convenient and accurate measurement. By maintaining the performance of the equipment through maintenance, the user can always obtain reliable results, and by adopting an open design (design patent), it helps in measurement.

The external structure of the product is minimized (1850 x 800 mm) and the scan area is maximized (490 x 900 mm), thereby increasing space efficiency for easy installation and use, even in narrow spaces.
MEDIKORS is increasing its market share through nationwide distributors in Korea, and its market share is gradually increasing overseas as well. Currently, the company is carrying out important projects in various countries, and it is estimated that the results will soon lead to strengthening its brand image and increasing global sales.
MEDIKORS is constantly focusing on developing new products by incorporating new technologies. It completely excludes the outdated practice of following or slightly developing fixed ideas and existing technologies. It is instead accelerating the development into products of transformative technologies that only this company can do.


 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:

Rehabilitative Medical Equipment

June 26, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

[INQ. NO. 2406M01] Man&Tel has currently completed a roadmap to supply products divided into three product groups: physical rehabilitation; brain rehabilitation; and care.
Man&Tel’s equipment for physical rehabilitation is a step-by-step series that begins with safely lying on a bed, continues with sitting-and-standing posture training, and finally involves walking after rehabilitating the shoulders and arms.
This equipment for brain rehabilitation helps prevent falls while walking through cognitive- and balance-training, and delays dementia by offering exercise- and cognitive-training at the same time. Also, this device can easily move and safely care for patients who are already unable to move, and suffer from dementia.
Man&Tel is currently manufacturing several competitive rehabilitation medical devices including Dream’s Bicycle. All of its products help prevent falls while walking, by improving muscle-strength and improving balance, and delaying dementia.
In particular, Dream’s Bicycle is capable of lower-limb-strength exercise, virtual road driving, endurance training, and cognitive training, and helps delay dementia by performing exercise-and cognitive-training at the same time.
A spokesperson for Man&Tel explained, “If we can install our rehabilitation medical equipment in community centers, welfare centers, etc., so that seniors can exercise more conveniently, we can help create a healthier society through disease prevention,” adding, “We want to stress that it is important for local governments to help take care of the health of seniors who need rehabilitation near their residences.”
“Our rehabilitation medical equipment business develops IT-medical convergence products to treat patients and give hope to families, and we aim to play a part in creating a more beautiful world,” remarked the CEO of the company.


 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:

Exports

June 26, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

Exports Continue to Be Positive for Eight Consecutive Months

Last May, Korea’s trade balance recorded a surplus of US$4.96 billion, the highest in 41 months. Major export items such as semiconductors, automobiles, and exports to China are clearly recovering and returning to normal.
According to data recently released by the Ministry of Trade, Industry and Energy (MOTIE), the nation’s exports last month were $58.15 billion, while imports amounted to $53.19 billion, and the trade balance thus recorded a surplus of $4.96 billion.
Exports remained positive for eight consecutive months, and the trade balance reached its highest level in 41 months since December 2020 ($6.7 billion).
This achievement includes the nation’s major export items such as semiconductors and automobiles. Semiconductors recorded $11.38 billion, up 54.5% year-on-year, and continuing a favorable trend for seven consecutive months. Automobile exports also reached $6.49 billion, breaking the record for the highest performance in May ever.
Exports of displays (15.8%), wireless communications (9.4%), and computers (48.4%) also increased, recording export plus for the third consecutive month in all IT items following the previous month.

In addition, exports of 11 out of the 15 major export items increased ― including computers, wireless communications, petrochemicals, automobiles, petroleum products, ships, bio-health, home appliances, and textiles.
Exports to China, which had been sluggish, are also showing signs of recovery. Exports to China reached $11.4 billion, the highest in 19 months since October 2022. Exports to the United States also recorded the highest performance in May ever, reaching $10.9 billion, increasing for the 10th consecutive month.
By region, seven regions, including the United States (15.6%) and China (7.6%), showed an increase. As exports are becoming brisk again, there are optimistic prospects for the nation’s annual economic growth rate to continue growing.
Korean exporters are continuously seeking to expand their business territories in the latter half of this year – and thus to elevate their global awareness in world markets.
For the 6th issue of Korea Buyers Guide, we are about to introduce some Korean exporters with globally competitive export items.


 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:

Industrial Automation Devices

May 27, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

Industrial Automation Devices

[INQ. NO. 2405M13] CIMON CO., LTD. leads the automation industry, offering an extensive lineup of innovative, industry 4.0-ready automation products such as PLCs, HMIs, SCADA software, and industrial PCs.
CIMON’s automation solutions have been successfully implemented across diverse industries, such as automotive, power plants, semiconductors, water/wastewater, electronics, oil and gas, and more.
CIMON offers not only complimentary technical support and training to its clients, but also fosters long-term partnerships, and ensures short lead times, while offering tailored solutions. Its products are affordable and highly reliable due to in-house manufacturing.

PLC series for general automation fields
CIMON’s PLC series provides innovative solutions not only for general automation fields but also for enterprise information integration. CIMON’s various PLC lineup consists of the UP series, CP series, PLC-S series, and Micro-S series to accommodate multiple applications. Among these exclusive lineups, the compact all-around PLC-S series is designed to be the most cost-effective unit in the PLC world. It provides high-level performance and rock-solid reliability for small-scale industrial automation systems.

Xpanel/HMI for intuitive designing software
CIMON’s Xpanel/HMI offers proven reliability for any industrial environment, and intuitive designing software for rapid project development. It is equipped with a high-speed industrial-grade CPU to handle complex scripts and graphics processing with ease.
CIMON’s XT/iXT series, based on the Win CE Operating System, utilizes the XpanelDesigner software for programming and comes in a variety of sizes: 4.3”, 7”, 10.4”, 12.1”, and 15.” The nXT and eXT series are powered by an embedded Linux platform, featuring robust hardware with 1GB RAM, 4GB storage, a quad-core CPU, and dual ethernet ports.

SCADA/UltimateAccess for enterprise information integration
CIMON’s SCADA software is designed with the utilities and flexibility that allows users to build innovative and efficient automation systems based on their specific application requirements. CIMON’s focus on open connectivity means there are multiple ways to interface with a host of other devices.
Extensive communication protocol support allows ultimate access to be used in diverse industrial environments. In addition, comprehensive libraries, user-friendly interfaces, and industry-relevant features provide an optimal environment for SCADA project development.

Industrial computer device (IPC) for any industrial environment
CIMON IPC is an industrial computer device that runs on Windows/Linux OS and an Intel Celeron and core series CPU in fanless design.

  
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With: , , , , ,

Pipe Connectors

May 27, 2024 by Leave a Comment
https://korean-machinery.com///inquiry

[INQ. NO. 2405M12] SAMYOUNG FITTING Co., Ltd. was established in 1989 and has been working on a single manufacturing technology for some 31 years, gaining a leading position as a global supplier both at home and abroad thanks to its outstanding technology.
SAMYOUNG FITTING is responding to current market conditions through the diversification of its customers and technologies.
Through continuous development, the company is able to stably extend, supply, and meet the gradually increasing demands of both domestic and overseas markets, and newly acquired customers.

Pipe Connectors Based on International Standards
SAMYOUNG FITTING mainly manufactures pipe connectors such as forged fittings, sleeves, flanges, etc., in accordance with international standards (ASTM, ASME, BS, JIS, ANSI, MSS, etc.).
SAMYOUNG FITTING is continuously providing different product groups for each of the following industries: nuclear power plants; shipbuilders at home and abroad; offshore; chemical companies; oil refineries; and constructors.

SAMYOUNG FITTING supplies custom-designed drilling & machining equipment for forged fittings, elbows, tees, automatic machining technologies, deep hole processing machines used to produce sleeves and atypically-sized pipes for the marine shipbuilding industry, high-speed cutting technology for large-sized pipes, and other core technologies.
Carbon steel, alloy steel, stainless steel, duplex steel, ni-base alloy steel, Cu-ni alloy, titanium and other materials are used for such products.
Founded in 1989, SAMYOUNG FITTING has evolved from being a local specialist to a global player. SAMYOUNG FITTING is a premium supplier of forged-fitting in the field of power plants, oil & gas, offshore, and the shipbuilding industry. It offers its customers outstanding products by applying its complex technologies.

  
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: Cover Story Tagged With:
«Previous Page
Next Page»