You are here: Home / Archives for New & hot

Wedge-wire screens

July 9, 2014 by Leave a Comment

[INQ. NO. 1407M04] Shinwoo Engineering, as a specialty maker of internal devices of seawater desalination equipment and of petrochemical and environmental facilities, has recently completed development of over 50-micron of wedge-wire screens. The wedge-wire screens made up of sturdy materials minimize the stop of production by a series of causes including oil leakage and activities of maintenance.
https://korean-machinery.com///inquiry Established in 1986, Shinwoo Engineering has been successfully growing and developing with highly talented persons and technologies in the fields of construction service and supervision service. Based on the technologies accumulated over the past 29 years, it is not only performing well in waterworks, but also trying constantly to earn competitiveness in the fields of water resources, urban planning, roads, railways, and environmental plants toward becoming a competent engineering firm, both domestically and internationally.

1407M04

 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: ,

Substance handling facility safety inspection kit

July 9, 2014 by Leave a Comment

[INQ. NO. 1407M03] CTA launched its business as a venture company within POSCO in 2002, as an environmental consulting firm dedicated to spreading to other companies the use of
clean technologies – an alternative in solving of environmental issues in the 21st century.

https://korean-machinery.com///inquiry CTA’s latest chemical-indicating tape is a kind of safety-check kit to prevent secondary accidents by easily and accurately checking the leak points with the occurrence of even a very small amount of chemicals and fumes in such parts as transferring pipes, copulas and valves in chemical facilities, and flange-related equipment.

CTA’s chemical indicating tape is approved among industrial circles by ensuring long-distance checks, exact checks of leak points, detection of colorless and odorless fumes, and identification of acid and alkali. This product reduces concerns from such challenges in chemical substance management, as it is impossible to: sensor the very small amount of chemicals and fumes; or to identify when colorless and odorless; and impossible to identify the exact leak points. Moreover, it is very costly to use leak detector and measurement equipment, and CTA’s chemical indicating tape is easy to use, with competitive prices.

1407M03

In addition, it contributes to prevention of secondary accidents by assisting detection at an early stage with simultaneous swift measures. CTA is working to becoming a corporate that can help companies both at home and abroad substantially through transferring of clean technologies and consulting – by diagnosing the general environment and proactively preventing pollutants including useless articles – based on the nation’s highest-level technology infrastructure in the environmental field, utilizing a wide range of technology and expertise.

 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: , ,

Main Control Valve

July 9, 2014 by Leave a Comment

[INQ. NO. 1407M02] Parker Mobile Control Division Asia offers a variety of valves for a variety of applications including instrumentation, semi- conductor, food and beverage, refrigeration, transportation, marine and industrial.

1407M02https://korean-machinery.com///inquiry The company also offers valves for specialty markets such as aerospace and solar, oil, gas and wind generation. Currently, its directional, pressure and fluid control valves are used in many applications with imperial and metric sizes available according to application and material. Materials include brass, steel, stainless steel, plastics and highly customized materials like PFA and PTFE.

The firm has recently proudly presented out its flagship main control valve titled “SCV-22/28” for from 10 to 31 tons excavators. The model is currently gaining a favorable comment for its outstanding performance at its application site ranging from excavation work and sophisticated fine job. The flagship model’s specifications are: maximum pressure of 380bar and maximum flow rate of 160 to 280 lpm.

The company’s current another hot items are MC-series, AV-series, SCV-series, BCV-series, FLV-series, and AVseries. All of its competitive items including SCV-22/28 are currently delivered to global scale enterprises of Doosan Infra Core, Hyundai Heavy Industries and Volvo Construction Equipment Group, while actively being exported to the overseas giants firms especially in Japan, India, and China.

 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: , ,

Electric Chain Hoists

July 9, 2014 by Leave a Comment

[INQ. NO. 1407M01] Samsung Hoist is one of the leaders in hoisting and material handling technology in the world. The company has developed and produced dozens of various types of
electric chain hoists with low maintenance, easy operation, smooth & silent running, simple & compact design, long working lift, and low weight. The capacity of the hoists from the company ranges from 0.25 to 20 tons, while hoists of over 20 ton capacity are also available by customer’s order.

1407M01https://korean-machinery.com///inquiry
1407M01_1 Samsung Hoist’s products have many advantages, including: powerful and durable motor and brake, aluminum alloy body reducing the weight, safe operation minimizing the risk of electric shock, deceleration mechanism ensuring low noise, highly durable material applied and advanced production management system of the company.

In addition to hoists, Samsung Hoist manufactures various cranes, including overhead cranes, suspension cranes, gantry cranes, jib cranes and mono-rail cranes, capable of handling up to 70 tons. Saddles and geared motors for cranes are also produced by the company as well.

 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: ,

Car Engine Interior Coating Material

May 16, 2014 by Leave a Comment

Bulls One2https://korean-machinery.com///inquiry[INQ. NO. 1405M37] Bulls Power engine treatment reduces power-robbing friction. Simply mix with engine oil every 10,000km and the protective film coats the engine’s interior for reduced friction, especially during cold starts. Bulls Power delivers safe, effective results. Previous extreme pressure additives generated environmentally harmful chlorine gas, corroded engine parts, and operated only at extreme pressures.

Teflon-based products do not mix effectively with oil and can restrict lubrication. Bulls Power has a synthetic oil base so it combines perfectively with modern oil formulas. Engine components like camshafts and crankshafts, pistons, and cylinders have been shown by certified tests to benefits from the addition of Bulls Power.

 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: , ,

Fuel System Cleaner

May 16, 2014 by 4 Comments

Bulls Onehttps://korean-machinery.com///inquiry[INQ. NO. 1405M36] Bulls One’s “Bulls One Shot is an essential management product that maintains engine performance by removing carbon buildup. Changing the oil is an important component of car care but removing carbon keeps engines running like new. Incomplete combustion results in the accumulation of carbon throughout the full injection system, which reduces efficiency.

Bulls One Shot effectively removes this residue for greater output and engine power. Clean air intake valves boost performance and reduce engine smoke. Fuel efficiency was improved an average of 3.1% in 27 gas/diesel cars (tested by an official domestic institute) and 102 trucks/buses (tested by some advanced local colleges including Hanyang).

Korea Research, an investigative institute for consumer opinions, found that 95% of people who used Bulls One products were satisfied with the results. Less engine noise greater but greater performance was reported by 78% of the respondents. A whopping 99% of consumers indicated their desire to purchase the products again. Moreover, high gas prices make Bulls One Shot a good investment in car care.

 
 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: ,

Continuous Motion Horizontal Cartoning Machines

March 17, 2014 by 22 Comments

Continuous Motion Horizontal
https://korean-machinery.com///inquiry[INQ. NO. 1403M19] Hoong-A’s continuous motion horizontal cartoner HC 400 is an upgraded model to improve the production speeds of up to 400 cartons per minute, keeping the basic design and platform of HC 300.

Servo drives on all the machine movements provide a precise control and reliability at high-speed production and electronic cams are controlled by the HMI touch screen panel.

The HC 400 cartoner meets market needs for operation safety and good accessibility. It also features efficient integration compatibility, flexibility and reliability. HC 400 achieves optimum production outputs across a wide variety of products by the innovative product transfer via chain and pulleys combined with safety clutches on all main drives movements.

The specific functional features of the model include production capacity of up to 400 cartons per minute in Max, MMI control via PC and touch panel, carton forming by three (3) head rotary arms, servo drive, applying of SUS304 stainless steel, adjustable product in-feed bucket conveyor width, checking system for presence of product feeding into carton, and bottle product available.

There is also the HC300 continuous motion horizontal cartoning machine. Designed and constructed in accordance with the requirements of the pharmaceutical industry and in observance of GMP standards. It is built with a balcony-style structure complying with the current GMP directives to allow complete visibility and inspection / maintenance / easy and swift cleaning.

The main driving mechanism includes a servo drive and timing belt for operation with the minimum maintenance. This fully streamlined machine offers quick format changeover or adjustment of systems via easy access with minimum number of parts. PC base HMI provides comfortable environment for even unskilled operator. This model is suitable for continuous operation of an exclusive product with high output.

 
 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: , , ,

Blister machine HM 600R

March 17, 2014 by 2 Comments

HM 600R
https://korean-machinery.com///inquiry[INQ. NO. 1403M18] Hoong-A’s newly developed high-speed blister machine HM 600R is capable of production speeds up to 600 blisters per minute utilizing a rotary sealing system. Lateral punching speed of 300 cycles per minute, dual lane architecture and a trouble-free servo drive system permits exceptional productivity. It is an uppermost model and upgraded for the best-quality products.

Fast format changeovers are possible by selecting preset parameters of a specific format on the control system. Servo drives and the PC control system fully automate the operation and provide a user-friendly environment for inexperienced operators.

The entire operation manual is stored in the PC control system for the operator’s convenience. Besides newly applied horizontal punching system leads to perfect blister discharging and easy integration of blister in-line operation. Punched blisters are transferred by a discharge wheel and positioned onto the discharge conveyor with the utmost pace and accuracy.

HM 600R handles a wide selection of blister packaging materials including all conventional thermo-forming materials such as PVC, PVC/PVDC, PVC/ACLAR, PP and COC along with aluminum for cold forming. The remaining features of the model include MMI control via industrial PC control system, compact floor space, three individual temperature-controlled preheating, drum sealing station + self adjustment indexing by servo motor, servo-controlled blister machine, easy and fast format mold changeover, convenient integration system for downstream machine, PP film applicable, and cGMP compliant design.

 
 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: , , , ,

Vacuum Cartridges

March 17, 2014 by Leave a Comment

Vacuum Cartridgeshttps://korean-machinery.com///inquiry

[INQ. NO. 1403M17] Korea Pneumatic System’s VMECA Vacuum Cartridges is one of the most advanced technologies available on the market today. VMECA Vacuum Cartridge features include maintaining vacuum levels despite fluctuations or drops in air pressure.

This very lightweight and compact unit allows for easy installation and maintenance. You have many different sizes to choose from ranging from micro, to mini and midi cartridges just to fit your application needs.

The VMECA Micro Cartridges are very small and compact in size. Due to its small nature, there is a lot of flexibility that goes into making a compact vacuum system. One of the main advantages to having a Vacuum Cartridge is that it can maintain vacuum level despite the sudden drops from the feed pressure.

The VMECA Micro Cartridges are the middle size of the vacuum cartridges. It is still compact in size and offers much flexibility into making a compact vacuum system. One of the main advantages to having a Vacuum Cartridge is that it can maintain vacuum level despite sudden drops from the feed pressure.

The Midi Vacuum Cartridge is the biggest of the three cartridges. It can deliver a substantial amount of flow and give a very quick response time. With this unit, you have the flexibility to make a compact vacuum system

 

 

 

 

korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: , , ,

Side Loading Cartoners

March 17, 2014 by Leave a Comment

Side Loading Cartoners
https://korean-machinery.com///inquiry[INQ. NO. 1403M16] Started in 1984, Samwoo Automation has been a leader in the Korean packaging and automation industry for more than 20 years, and has accumulated know-how and skills by working on various projects related to enhancing production efficiency.

As its motto states, Samwoo Automation specializes in providing a total engineering solution to maximize production efficiency of factory automation lines. Samwoo Automation offers side-loading cartoning machines, which are the most common way of packaging cartons used worldwide.

Products are loaded into preformed paper cartons or blanks in side ways which are formed automatically by barrel cam loaders. The machine has no carton forming and no product pushing into carton functions to minimize the loss of cartons. Side flaps are sealed at both ends by using hotmelt glues. Cartoners are available in both steel and stainless steel versions.

Various versions of cartoners manufactured by the maker are designed to accommodate all different carton sizes in their ranges. Their common features include variable speed control, servo-driven, adjustable carton size for each model, support of synchronization with automatic collate & load feeder, etc.

 
 
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Filed Under: New & hot Tagged With: , , , ,
«Previous Page
Next Page»