Plate & Frame Heat Exchanger

https://korean-machinery.com///inquiry

[INQ. NO. 2111M08] LHE’s plate heat exchanger consists of heat transfer plates for exchanging heat, gaskets that seal the fluid fixed and movable covers, fluid inlet & outlet port nozzles, carrying & guiding bars and tightening bolts.
The key element of the plate heat exchanger is a hydraulically-pressed metal plate with a thin rectangular plate, gasketed at the edges.
Several heat plates are overlapped to form a single pack and bolted between the fixed and movable covers. The gasket installed on the heat plate prevents the mixture of the two fluids and leaks out of the plate pack to the surroundings.
Each pair of adjacent heat transfer plates forms a channel and hot fluid and cold fluid flow within that channel. While two fluids pass through the channel hot fluid transfer some of its heat energy to cold fluid in the other channel through the thin plate. As a result, it reduces the temperature of the hot fluid and increases the temperature of the cold fluid.

Plate & Frame Heat Exchanger


LHEBloc’s main component is the plate pack, panels, panel gaskets, upper & lower heads, columns and support.
LHEBloc is manufactured by inserting a welded plate pack into a rigid rectangular frame secured with bolts and has the advantage of providing a large heating area even in a very small space. The frame ensures mechanical strength while also insolating the flow paths of the two fluids.

Plate & Frame Heat Exchanger


If necessary, each flow path is fitted with a welded or detachable baffle. Four side carbon steel panels with nozzles attached have pipe connections and the panels can be lined with the same material as the heat plate. The plate, baffle and panel liner are made of stainless steel, titanium, etc. A pair of heat plates is welded along both ends.

Plate & Frame Heat Exchanger


The spiral heat exchanger is made of two concentric channels in which spacer pins are welded to create the gap of the channel. In order to meet the customer’ s requirements and operating conditions, channel spacing and channel width are determined, and the overall flow rate allowable pressure drops, and the particles contained in the fluid are considered.
 
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: