[INQ. NO. 1911M21] Shin Woo UBiCos is a company recognized in Republic of Korea for helping solve parking problems with its various parking system models.
Based on its accumulated experience, the company upgrades the quality of a building with its built-in parking systems.
Shin Woo UBiCos’s Vertical-type parking system has the space usage efficiency maximized because 76 cars can be parked in three parking areas using the system. A lifting speed of up to 125m/min. shortens our operation time for storing and releasing a vehicle.
By mounting a turntable for advance, storing and releasing, even a beginner can easily park and retrieval a vehicle, allowing you to select the position of an exit, depending on site conditions. Depending on the type of building, installation is possible using Multi-floor cart type, Universal type, Stacker type, Puzzle type, or standalone tower-type. Given an accessing method, each lower, middle and upper section can be freely chosen.
The company’s multi-floor cart type parking system can be extended depending on the dimension of the underground space or on ground space. It has a large variety of applications, from 10 cars to hundreds of cars, thus making it easy for large-scale facilities. It 
transports cars through the individual operation of a cart and a lift of each level. Also, it has a faster entering and exiting time. A built-in turntable enables facilitates easy advance, storing and releasing. Since integrated management through the computer or the touch screen is possible, the total operation can be seen at a glance and thus is very convenient.
Shin Woo UBiCos’s universal type can increase parking efficiency several times better than a self-parking type, because the entrance (exit) is fixed in one place. It is suitable for a building that can accommodate from 10 to 40 vehicles, enabling a two- to six-stage multilayered facility.
Depending on a form of a building and other location conditions, the top and bottom construction of the turntable is possible, and the choice of an entrance (exit) is easy.
Depending on an entrance (exit) position, it is divided into the top stocking type, the direct stocking type, and the middle stocking type.
Building customer-oriented parking systems
Since its establishment in 2002, Shin Woo UBiCos has constantly been focusing on building customer-oriented systems and service delivery, while improving its core competence in the development of specialized and differentiated control systems.
The rising sun of the 21st century will no longer mean 24 hours. In this era where concepts of time and space are disappearing, Shin Woo UBiCos will continue to pursue quality management and customer satisfaction as its mission to grow as a 21stcentury leader with its top-notch system and service.
korean-machinery.com | Blog Magazine of korean-machinery, brands and Goods
SUPER ON is operated and handled under computerized control. To store and retrieve items, the pallet is placed at In/Out station and ID (if necessary) attached on the item is read and entered into a computer. With a monitor stand, the inventory information includes ID information of items that can be modified and saved.
As Mecha Industry is a family-owned company producing sheet metal fabricated covers and parts made of aluminum, steel and stainless steel, and as all workers belong to one family, the company’s fellowship is based on a strong solidarity and long experience.
Vaporizing is a kind of change in the state of matter. Through vaporization, liquid absorbs heat energy and changes into gas. In the meantime, an LPG vaporizer is a device that converts liquid LPG to gas by applying heat energy from heaters, steam, hot water, gas burners, and so forth.
Dry-type LPG vaporizers are directly heated by heaters so their initial operating time is short. Accordingly, they feature good thermal efficiency and excellent workability. Dry-type LPG vaporizers’ early operating time is about one-third of that of water-bath type LPG vaporizers.
Clamp-on ultrasonic flowmeter Xonic 100L provides a time-saving and convenient solution for flow monitoring. Xonic 100L measures time difference of flow using ultrasonic signals emitted from outside the pipe. Clamp-on transducers are mounted directly onto existing pipes. There is no need to cut or weld the pipe for installation and maintenance. It is ideal for municipal water, wastewater, cool & hot water, liquids with heavy slurry, seawater, oil & chemical, as well as block flow monitoring.
Xonic 100P is a handheld ultrasonic flowmeter for sites where temporary measurement is required. It can be used to compare field flowmeters performance and as a portable device to spot-check. It can measure virtually any type of liquids with less than 30% of solids or bubbles such as clean water, wastewater, milk, limestone, crude oil. Xonic 100P operate 24 hours with an internal rechargeable battery.
Xonic 100LO is a world-first ultrasonic flowmeter using transit-time method for measuring partially filled sewer pipes. The system uses a specially designed 4-path transducer, which allows one to measure both low flow at midnight and high flow during rainy season. The transducer design does not disturb flow and is free from sand or contamination. If the sensor area is filled up with sediment, the smart alarm function will be activated to inform the user to clean the pipe. Therefore, no regular pipe cleaning is required. Xonic 100LO can replace the doppler flowmeter easily.
The product is based on the materials of A6061 and A6063, and T5 and T6 heat treatment gave the product sufficient strength, a beautiful surface, and excellent mechanical properties.
The product has 5mm, 6mm, 8mm and 10mm openings, giving customers a wider choice of applications. V lines at the openings enable easy positioning when drilling.
broachings, hobbings, gear shapers and bebel assembles after grinding and assembling them.
As you see, the Seil Group implements all processes from forging, its basic business, to processing, grinding and assembling. Therefore, the group has secured a system that can manage quality and cut costs and is producing steel parts for cars and heavy industry products such as farming machines, cranes, forklift trucks and forklifts, among others.
The JEC Innovation Awards is a long-established and worldwide program with three simple goals: identify, promote and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations.
SEJINiGB is awaiting feedback from various users. The company is making endeavors to keep every customer happy by combining technology, products and services nicely. In addition, the company is devoting itself to development and research with a sincere attitude to grow into the world’s best speed reducer manufacturer.
Korean-Machinery.com 